The Machine Cannot Be Detected In The Wireless Lan - Canon Pixma MG7150 Online Manual

The Machine Cannot Be Detected in the Wireless LAN

Make sure that the machine is turned on.
Check1
Is Change wireless/wired in LAN settings under Device settings set to
Check2
Disable LAN?
When the machine is connected to the computer temporarily using a USB
Check3
cable, make sure that the USB cable is connected properly.
When you set up the wireless LAN connection using a USB cable or change the wireless LAN settings using IJ
Network Tool, connect the machine and the computer securely.
Connecting the Machine to the Computer Using a USB Cable
Make sure that the machine setup is completed.
Check4
If not, perform setup with the Setup CD-ROM or perform it according to the instructions on our website.
When using IJ Network Tool, click Update to search for the printer again.
Check5
Canon IJ Network Tool Screen
When searching for a printer over a network, make sure that the machine is
Check6
associated with the port.
When No Driver is displayed under Name in IJ Network Tool, there is no association. Select Associate Port on
the Settings menu, then associate the port with the printer.
When the Printer Driver Is Not Associated with a Port
Make sure that the network settings in the printer are identical with those of the
Check7
access point.
Refer to the instruction manual provided with the access point or contact its manufacturer to check the access
point settings, and then modify the machine settings.
How to Set a WEP/WPA/WPA2 Key
Make sure that there is no obstruction.
Check8
Wireless communication between different rooms or floors is generally poor. Adjust the location of the devices.
Make sure that the machine is not place as far away from the access point.
Check9
The access point is located indoors within the effective range for wireless communication. Locate the machine
within 164 ft. / 50 m from the access point.
Make sure that there is no source of radio wave interference in your vicinity.
Check10
There may be a device such as a microwave oven using the same frequency bandwidth as the wireless station.
Place the wireless devices as far away from the interference source as possible.
Make sure that the network settings of the computer are correct.
Check11
Make sure that the computer can communicate with the printer and the access point over the wireless LAN.
38