Canon Pixma MG7150 Online Manual page 426

Important
When opening or closing the operation panel, do not touch the buttons and touch screen on the operation panel.
Doing so may result in an unexpected operation.
Do not touch the metallic parts or other parts inside the machine.
If the operation panel is left open for more than 10 minutes, the print head holder moves to the right. In this
case, close and reopen the operation panel.
3. Remove the ink tank with the lamp flashing fast.
Push the tab (A) and lift the ink tank to remove.
Important
Do not touch other parts besides the ink tanks.
Handle the ink tank carefully to avoid staining of clothing or the surrounding area.
Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables.
Note
Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one when replacing
two or more ink tanks.
For details on ink lamp flashing speed, see
4. Prepare a new ink tank.
(1) Take a new ink tank out of its package, remove the orange tape (
remove the protective film (
Checking the Ink Status with the Ink
) completely.
173
Lamps.
) completely, then