Before Using The Machine With The Access Point Mode - Canon PIXMA MG5500 series Online Manual

Before Using the Machine with the Access Point Mode

When you use the machine with the access point mode, be sure to specify the access point name of the
machine and the security setting in advance.
Setting Procedure When Using the Machine with the Access Point Mode
1. Make sure that the machine is turned on.
2. Select Setup on the HOME screen.
LCD and Operation Panel
3. Select Device settings, then press the OK button.
4. Use the button to select LAN settings, then press the OK button.
5. Use the button to select Other settings, then press the OK button.
6. Use the button to select Access point mode settings, then press the OK button.
The screen to specify the access point name is displayed.
7. Press the OK button.
8. Enter the access point name.
Enter the access point name when you use the machine as an access point.
9. Press the left Function button to finish entering the name.
10. Press the left Function button to finish specifying the access point name.
11. Use the button to select the security setting, then press the OK button.
Disable
Finishes the access point settings without specifying the security setting.
WPA2-PSK (AES)
Specifies the security setting applying WPA2-PSK (AES). Proceed to the next step when the
screen to specify the passphrase.
12. Press the OK button.
13. Enter the passphrase.
14. Press the left Function button to finish entering the passphrase.
214