Aligning The Print Head Manually - Canon Pixma MG7150 Online Manual

Aligning the Print Head Manually

If printed ruled lines are misaligned or print results are still not satisfactory after adjusting the print head position
automatically, adjust the print head position manually.
Note
For details on adjusting the print head position automatically, see
The print head alignment pattern is printed in black and blue.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Make sure that three or more sheets of A4 or Letter-sized plain paper are loaded in the
cassette (lower).
3. Open the paper output tray.
(1) Holding both sides of the paper output tray, gently open it.
The output tray extension will open automatically when the paper output tray is opened.
(2) Extend the paper output support.
Important
If the inner cover is open, close it.
4. Print the print head alignment pattern.
(1) Flick the HOME screen, then tap
Using the Operation Panel
The setup menu screen will appear.
(2) Tap Maintenance.
The Maintenance screen will appear.
(3) Tap Manual head alignment.
The confirmation screen will appear.
Aligning the Print
Setup.
195
Head.