Part Names And Functions; Atw-R5220/Atw-R5220Dan - Audio Technica 5000 Series User Manual

Part names and functions

ATW-R5220/ATW-R5220DAN

Front panel
❶ ❷
❶
Power button ( )
Use to turn the receiver on or place in standby.
( : Symbol indicates standby.)
❷
IR SYNC window
Use to IR SYNC with the transmitter (ATW-T5201, ATW-T5202).
❸
Function button 1
Press to switch between the main display and the level meter display.
❹
Function button 2
Press to switch the main display.
❺
Display
Displays the receiver state and setting menus.
❻
BACK button
Press to take the display back one screen.
Press and hold to return to the Main screen.
❼
Control dial
Displays the setting menu when you press the dial. Turn the dial to select a setting and press to confirm.
When you press and hold the dial, "TX SYNC" setting screen is displayed.
❽
Headphone monitor (6.3 mm) output jack
This is the headphone output jack used for monitoring. It allows you to monitor receivers 1 and 2.
❾
Headphone channel indicator
Displays which receiver is being monitored, receiver 1 or 2.
When normal: lights in white
When overloaded (headphone output): lights in red
❿
Headphone volume/Channel switch
Use when adjusting the volume of the headphones for monitoring.
Press and release the dial to switch between receivers 1 and 2.
• Does not affect receiver audio output level.
❸ ❹ ❺ ❻ ❼ ❸ ❹ ❺
5
❻ ❼ ❽ ❾ ❿