Atw-T5201; Atw-T5202 - Audio Technica 5000 Series User Manual

Uhf wireless systems
Table of Contents

Advertisement

Specifications

ATW-T5201

RF output power
*1
Spurious emissions
Input connection
1
4
2
3
High-pass (low-freq. roll-off)
Batteries
Operating temperature range
Battery life
Dimensions
Weight (without batteries)
Included accessories
*1 May differ depending on the country or region in which you live.
*2 Depending on battery type, usage and environmental conditions.

ATW-T5202

RF output power
*1
Spurious emissions
Microphone capsule
High-pass (low-freq. roll-off)
Batteries
Operating temperature range
Battery life
Dimensions
Weight (without batteries)
Included accessories
*1 May differ depending on the country or region in which you live.
*2 Depending on battery type, usage and environmental conditions.
For product improvement, the product is subject to modification without notice.
High: 50 mW, Mid: 10 mW, Low: 2 mW (switchable), at 50 ohms
Following federal and national regulations
Four pin locking connector
Pin 1: GND
Pin 3: MIC INPUT
80 Hz, 12 dB/octave
Two 1.5V AA, not included
-5 ºC to +45 ºC (23 º F to 113 ºF)
High: 7 hours
, Mid: 9 hours
, Low: 10.5 hours
*2
*2
64 mm (2.52") × 70 mm (2.76") × 17 mm (0.67") (W × D × H)
Approx. 92 g (3.2 oz)
Protective carrying case (AT-BG3)
High: 50 mW, Mid: 10 mW, Low: 2 mW (switchable), at 50 ohms
Following federal and national regulations
Interchangeable industry standard thread
80 Hz, 6dB/octave
Two 1.5V AA, not included
-5 ºC to +40 ºC (23 º F to 104 ºF)
High: 6.5 hours
, Mid: 8 hours
, Low: 9.5 hours
*2
*2
ATW-T5202 (without capsule): 193 mm (7.60") long, 37 mm (1.46") maximum diameter
ATW-T5202/C510: 265 mm (10.43") long, 54 mm (2.13") maximum diameter
ATW-T5202/C710: 271 mm (10.67") long, 50 mm (1.97") maximum diameter
ATW-T3202 (without capsule): 200 g (7.1 oz)
ATW-T5202/C510: 330 g (11.6 oz)
ATW-T5202/C710: 314 g (11.1 oz)
AT8456a Quiet-Flex™ stand clamp (5/8"-27 male to 3/8"-16 female threaded screw adapter),
Protective carrying case (AT-BG3)
34
Pin 2: INST INPUT
Pin 4: DC BIAS +10 V
(alkaline)
*2
(alkaline)
*2

Advertisement

Table of Contents
loading

Table of Contents