Table of Contents
Advertisement
Setting ATW-R5220/ATW-R5220DAN
Setting MAC address
1.
From the menu screen, turn the control dial, select [NETWORK]
and then press the control dial.
2.
Turn the control dial, select [MAC ADDRESS].
Using test tool
Using the walk test function
The walk test function records the RF level being received for 90
seconds.
1.
From the menu screen, turn the control dial, select [TOOLS] and
then press the control dial.
2.
Turn the control dial, select [WALK TEST] and then press the
control dial.
3.
Select [START] and press the control dial.
• Walk test starts.
Setting monitor mode
This mode will enable monitoring with headphones only. (The audio
OUT and DANTE OUT will be muted.)
1.
From the menu screen, turn the control dial, select [TOOLS] and
then press the control dial.
2.
Turn the control dial, select [MONITOR MODE] and then press
the control dial.
• Monitor mode is set.
Setting DANTE
This setting is used only for ATW-R5220DAN.
Displaying the device name and channel label
1.
From the menu screen, turn the control dial, select [DANTE] and
then press the control dial.
2.
Turn the control dial, select [INFO].
Setting the DANTE's IP
1.
From the menu screen, turn the control dial, select [DANTE] and
then press the control dial.
2.
Turn the control dial, select [IP SETTING] and then press the
control dial.
3.
Select an item you want to set and press the control dial.
IP Mode
IP Address*
Subnet Mask*
Gateway*
*This item can be set only when [IP Mode] is set to [Static].
4.
Set each item.
Setting MAC address
1.
From the menu screen, turn the control dial, select [DANTE] and
then press the control dial.
2.
Turn the control dial, select [MAC ADDRESS].
Checking the version of the DANTE
This function displays product information such as the version of the
DANTE.
1.
From the menu screen, turn the control dial, select [DANTE] and
then press the control dial.
2.
Turn the control dial, select [VERSION].
22
Set how to obtain IP addresses.
[Auto]: IP addresses are automatically
assigned.
[Static]: Set to use the specified static IP
addresses.
Specify static IP addresses.
Set the subnet mask.
Set the gateway.
Advertisement
Table of Contents
