Part names and functions
ATW-T5201
❶
❷
❸
❺
❻
❼
❶
Indicator
LED that shows the status of the transmitter.
When the power is turned ON: Solid green
When the transmitter is muted: Solid red
❷
Transmission antenna
❸
Function button
Press to turn the screen back on if it shuts off. Press and hold to
perform preselected function.
❹
Input connector
Connect a microphone, a headworn microphone, a guitar cable,
etc.
Pin 1: GND
Pin 2: Instrument input
❺
Display
Shows the current status.
If no buttons are pressed for a period of 30 seconds, the display
will turn off.
❻
BACK button
Press to take the display back one screen.
Press and hold to return to the Main screen.
❹
❽
❾
❿
Pin 4: +10 V output
Pin 3: Microphone input
⓫
❼
Lever push switch
Use to select various settings.
UP ( )
Turn to the right to change a selection.
DOWN ( )
Turn to the left to change a selection.
SET (
)
Press to display the settings screen. Move it toward UP/DOWN,
select the setting item, and press to confirm the selection.
❽
Power switch
Use to turn the power on or off.
❾
SYNC button
Use to IR SYNC with the receiver (ATW-R5220/ATW-R5220DAN).
❿
Battery cover
⓫
IR SYNC window
Use to IR SYNC with the receiver.
7
❷