Settings
Various settings can be made from the menu screen shown on the
display.
ATW-R5220/ATW-R5220DAN
1.
Press the control dial.
• The main menu screen appears.
2.
Turn the control dial to select the item you wish to set.
A
B
TX
VOCAL1
HPF
000.000
50
mW
G r 06 C h 1 2
RF
3.
Press the control dial to open the settings menu of the selected
item.
• Press the BACK button to go back one screen.
• To cancel partway through making a setting, press the BACK button.
• While on the settings screen, the display will return to the main screen if
approximately 60 seconds pass without a button or the control dial being
used.
UTILITIES
0
FREQUENCY
MHz
NAME
BU
A F
15
ATW-T5201/ATW-T5202
The transmitter's (ATW-T5201/ATW-T5202) UP/DOWN button operation
is explained below. While this explanation uses the UP/DOWN button
operation of ATW-T5202 as its example, it can easily be applied to
either transmitter.
ATW-T5201: Turn to the UP/DOWN position.
ATW-T5202: Press the UP/DOWN button.
1.
Press the SET button.
• The menu screen appears.
ATW-T5201
2.
Press the UP/DOWN button to select the item you wish to set.
FREQUENCY
000
Selected
menu item
3.
Press the SET button to display the settings screen for the
selected item.
• Press the BACK button to go back one screen.
• To cancel partway through making a setting, press the BACK button.
• While on the settings screen, the display will return to the main screen if
approximately 30 seconds pass without a button being used.
ATW-T5202
.000
MHz
Current setting value