How To Attach The Transmitter (Atw-T5201); Making Connections (Basic Connections) - Audio Technica 5000 Series User Manual

How to attach the transmitter (ATW-T5201)

The ATW-T5201 transmitter is equipped with a clip that can be used to attach the transmitter to a belt, etc.
You can reverse the direction of the input connector by
attaching the clip in the opposite direction.

Making connections (basic connections)

This is an example of connections made when using one receiver.
Whip antenna
Mixer input
Pull both sides of the clip firmly to the outside to remove
the clip from the transmitter.
Whip antenna
To computer,
Mixer input
DANTE device or
network switch
27
Power cable