How To Attach The Transmitter (Atw-T5201); Making Connections (Basic Connections) - Audio Technica ATW-R5220 User Manual

How to attach the transmitter (ATW-T5201)

The ATW-T5201 transmitter is equipped with a clip that can be used to attach the transmitter to a belt, etc.
You can reverse the direction of the input connector by
attaching the clip in the opposite direction.

Making connections (basic connections)

This is an example of connections made when using one receiver.
When connecting more than one receiver via a distributor (sold separately), refer to the distributor's user manual.
Whip antenna
Mixer input
Pull both sides of the clip firmly to the outside to remove
the clip from the transmitter.
Whip antenna
To computer or
Mixer input
DANTE device
27
Power cable