Device Led Feedback - HomeMatic HM-RC-12-B Operating Manual

The 12 button remote control is equipped with a shock sensor.
The background lighting of the button field is illuminated for 5
seconds when the remote is shocked or if a button is pressed. The
time is extended by 5 seconds each time a shock is registered or
a button is pressed while the background is illuminated.
Do not carry the remote control in a pocket or laying
in your vehicle. Accidentally switching the background
lighting on consumes battery power and reduces the
lifespan of the batteries!
7.2

Device LED feedback

The feedback signals apply for operation with and without the
center.
No actuators have been taught yet:
Brief press of the button: LED is illuminated in orange for 1
second,
Extended button press: LED is illuminated in orange for 1 sec-
ond,
Button held down: LED is illuminated as long as the button is
pressed and goes dark afterward.
Actuators are taught:
Brief/long press of the button: LED is illuminated in orange as
long as the function transfer requires, this time depends on the
number of actuators that have been taught for this button, the
number of required transmission attempts and the encoding and
transmission mode.
After the radio transmission is complete, the LED is illuminated in
either red or green for 1 second.
Green: all actuators have confirmed the (last) bi-directional com-
mand,
Red: at least one actuator has confirmed the (last) bi-directional
command.
28