Steering Dual Rate/Throttle Dual Rate "D/R; Atl Function "Atl - RadioLink RC6GS Instruction Manual

RADIOLINK ELETRONIC LIMITED
www.radiolink.com
(1) Enter the function menu and use "Dec(-)" or"Inc(+)" button to access REV function.
(2) Press "Enter" button to get into REV function interface.
(3) Use "Dec(-)" or "Inc(+)" button to select ST channel, press "Enter"key, and the "NOR" will
blink.
(4) Press "Enter" key, the "NOR" stops blinking, Use "Dec(-)"or"Inc(+)"button to reverse the
ST servo operation direction.
(5) TH channel, CH3, CH4, CH5 and CH6 can be set similarly.
(6) When ending setting, return to the initial screen by pressing "Exit" button twice.

4.14 Steering Dual Rate/Throttle Dual Rate "D/R"

Dual rate
The steering left and right servo travels are adjusted simultaneously. When you want to increase the
servo travel, adjust the + side. When you want to decrease the servo travel, adjust the - side.
Setup Item
Steering D/R
Throttle D/R
RATE
Steering D/R rate (RATE)
0%~100%
Initial value: 100%
Throttle D/R rate (Throttle D/R RATE)
0%~100%
Initial value: 100%
(1) Enter the function menu and use "Dec(-)" or "Inc(+)" button to access D/R function.
(2) Press"Enter" button to get into D/R function interface.
(3) Use "Dec(-)" or "Inc(+)" button to select Steering D/R RATE, press "Enter"key, and the initial
value of Steering D/R RATE will blink. Use"Dec(-)"or "Inc(+)" button to make adjustments.
(Note: In the interface of adjusting the value, return to the initial value"100%" by pressing"Dec(-)"
and "Inc(+)" buttons simultaneously for about 1 second.)
(4) Press "Enter" key, the adjusted value stops blinking, now the steering D/R RATE has been set.
(5) Throttle D/R RATE can be set similarly.
(6) When ending setting,return to the initial screen by pressing "Exit" button twice.

4.15 ATL Function "ATL"

Brake side adjustment
This function decreases the set value when the braking effect is strong and increases the set value
when the braking effect is weak.
22