Computer Mode; Selecting Input Source; Selecting Computer System - Christie 38-VIV205-01 User Manual

COMPUTER INPUT
DIRECT OPERATION
Select the appropriate input signal by pressing the INPUT button on
the Top control panel or on the Remote Control Unit.
If projector cannot reproduce proper image, select correct input source
through MENU OPERATION (see below).
MENU OPERATION
Press MENU button and ON-SCREEN MENU will appear. Press
1
the POINT LEFT/RIGHT buttons to select Input and press
SELECT button. Another dialog box INPUT SELECT Menu will
appear.
2 Press the POINT DOWN button and a red-arrow icon will
appear. Move arrow to INPUT source that you want to select,
and then press SELECT button.
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
1 Press MENU button and ON-SCREEN MENU will appear. Press
the POINT LEFT/RIGHT button to move the red frame pointer to
INPUT Menu icon.
Press the POINT DOWN button to move the red arrow pointer to
2
Input 1 and then press SELECT button. Source Select Menu will
appear.
3 Move the pointer to either Digital or Analog and then press
SELECT button.
When your computer is connected to COMPUTER
Digital
INPUT (DIGITAL) terminal, select RGB (Digital).
When your computer is connected to COMPUTER INPUT
Analog
(ANALOG) terminal, select RGB (Analog).
When connecting a computer output [5 BNC Type (Green, Blue, Red,
Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V
jacks.
1 Press MENU button and ON-SCREEN MENU will appear. Press
the POINT LEFT/RIGHT button to move the red frame pointer to
INPUT Menu icon.
2 Press the POINT DOWN button to move the red arrow pointer to
Input 2 and then press SELECT button. Source Select Menu will
appear.
Press the POINT DOWN button and a red-arrow icon will
3
appear. Move arrow to "RGB", and then press SELECT button.
22

SELECTING INPUT SOURCE

SELECTING COMPUTER SYSTEM

WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
INPUT button
Input 1
Input 2
Input 3
INPUT Menu icon
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow)
to Input 1 and press SELECT
button.
Input 1
Source Select Menu
Move the pointer to Digital or
Analog and press SELECT
button.
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow)
to Input 2 and press SELECT
button.
Input 2
Source Select Menu
Move the pointer to RGB
and press SELECT button.