Table of Contents
Advertisement
DDNS status
> Don't use DDNS server: Disable the DDNS function.
> Use DDNS server: Enable the DDNS function.
-
Provider: Displays the DDNS provider.
-
Hostname: Enter the hostname you want to use.
•
Save: Click this button to confirm the settings.
IP filtering
The access of the IP addresses in the list are allowed or denied
according to the choice made in the drop-down list of the Basic
policy option. The administrator can add up to 10 IP address
entries to the list (a single entry can contain multiple IP address-
es). The users from these IP addresses need to be specified in
the user list with the appropriate access rights. The IP list is to
control the access permission of clients by checking the client IP
address.
34
IP list
> Basic policy: Select the basic policy type.
-
Allow all: Allow all the IP address basically, but
the IP addresses in the list are denied.
-
Deny all: Deny all the IP address basically, but the
IP addresses in the list are allowed. It needs at
least one IP address to activate this function.
•
Save: Click this button to confirm the settings.
•
Add: Click this button to add the IP address.
1. Click the [Add] button.
2. Set the IP options.
-
Alias: Enter the alias.
-
From: Enter the start IP address for the IP filtering.
-
To: Enter the end IP address for the IP filtering.
Note:
If you want to deny or to allow a range of IP address-
es, enter the start IP address to "From" and the end
IP address to "To". You can also add an IP address by
entering the same IP address to "From" and "To".
Operation and settings
Advertisement
Table of Contents
