Table of Contents
Advertisement
Network settings
Basic
General
> MAC address: Displays the MAC address.
Port & Encryption
> Web port: The default HTTP port number (80) can be
changed to any port within the range 1 025 to 65 535.
> RTSP port: Check RTSP port. The default port is 554.
Other ports can be selected within the range
1 025 to 65 535.
> Network encryption: Select the HTTP or HTTPS
option for security.
Note:
The RTSP port number should not be same with the
web port number.
TTL
> TTL: This option indicates the Time-To-Live of multi-
cast packets. The default setting is 7, and the allowed
TTL range is from 1 to 255.
32
ARP Ping
> Enable ARP Ping to configure IP address: Check to
enable ARP ping.
•
Save: Click this button to confirm the settings.
RTP stream
RTP (Real-time Transport Protocol) is an internet protocol that
allows programs to manage the real-time transmission of multi-
media data, via unicast or multicast.
Master / Slave
> RTP unicast: When enabled the transmission of the
data to the specified equipment happens on a net-
work specifying a single address.
> RTP multicast: When enabled it reduces the transmis-
sion load on the camera by making the computer of
the same segment network receive the same trans-
mission data. When multicast option is checked then
select Video Port number, Audio Port number and
Operation and settings
Advertisement
Table of Contents
