LG LW9422 series Owner's Manual
Network dome camera
Hide thumbs
Also See for LW9422 series:
- Owner's manual (63 pages) ,
- Owner's manual (56 pages) ,
- Owner's manual (2 pages)
Table of Contents
Related Manuals for LG LW9422 series
Summary of Contents for LG LW9422 series
- Page 1 OWNER’S MANUAL Network Dome Camera Please read this manual carefully before operating your set and retain it for future reference. MODELS LW9422 series LNP2810T series LNP3022 series LNP2810 series LNP3020T series LNP3022T series 1411 (V2.5)
-
Page 2: Table Of Contents
Recommended PC Requirements ...........4 Accessing the LG IP device..............5 LG Smart Web Viewer Overview ............6 Configuration menu overview ..........7 Configuring the LG Network Camera Device ......7 Accessing the Configuration menu .........7 System settings ...............8 Audio & Video settings ............11 Network settings ..............19 User settings .................22... -
Page 3: Introduction
Introduction The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual contains instructions on how to install and manage the LG Network Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader. -
Page 4: Operation And Settings
Microsoft Internet Explorer (32 bit) above The LG Ipsolute VMS and the LG Smart Web Viewer program Web Browser the version 7.0 and below the version 9.0. are the network program of the LG Video Server and the LG IP cameras. DirectX 9.0c(Windows XP), DirectX DirectX 11(Windows Vista/7) or above •... -
Page 5: Accessing The Lg Ip Device
Logging in to the LG Smart Web Viewer Run the IP Utility and find the LG IP devices. You can access the LG IP device by following the below steps. When the LG IP devices appear in the IP Utility... -
Page 6: Lg Smart Web Viewer Overview
Displays the current surveillance live options. [Display] is displayed on left screen. You can monitor the camera top of the live view window in order of image on the live view window of the LG selecting options. Smart Web Viewer. Video Analysis >... -
Page 7: Configuration Menu Overview
Event Triggered Event Scheduled Event Configuring the LG Network Camera Device The features and options of the LG IP camera are configured through the Configuration menu. Only administrator-level users have permission to access the Configuration menu. Accessing the Configuration menu Click the [Configuration] button to display the LG Smart Web Viewer configuration window. -
Page 8: System Settings
System settings Maintenance Version Displays the current Model Name and Software version. System reboot Click the [Reboot] button to restart the IP device. It takes some minutes for the IP device to start again. Note: Backup and restore Click OSS(Open source software) link to check the information >... - Page 9 SD card has insufficient space. 2. Click the [Mount] button. If the micro SD card is mount- • The downloaded file can be played by using the LG File ed to the system correctly, the [Mount] button will be player.
- Page 10 [Maintenance] or [Factory Reset]. You can change the text settings on [Text Overlay] directly. Language Language list Select a language for the LG Smart Web Viewer configuration menu and information display. Note: The language options may differ depending on models.
-
Page 11: Audio & Video Settings
Audio & Video settings Camera (LNP2810, LNP2810T, LNP3020T, LNP3022, LNP3022T) Preview Camera (LW9422 series) You can preview the camera image on the preview window. 1. Move the camera to the point you want by using the arrow buttons. 2. Adjust the zoom, focus options. - Page 12 Focus Exposure > Mode: Select [Mode] option on the [Focus] menu, then select the following mode. Auto: Auto-focus is activated automatically. > IRIS: Select the desired lens IRIS value for camera exposure. ONE PUSH: The focus is activated manually. If the camera Select [IRIS] option on the [Exposure] menu, then select a value.
- Page 13 darker. White Balance > Sens-Up: If pictures are not clear due to darkness, this SENS-UP operation would increase the sensitivity of picture. Note: If you set to one of the [Shtter Speed] options except AUTO on the [Shtter Speed] menu or [AGC] to [OFF], the [SENS-UP] setting is not available.
- Page 14 Day/Night Privacy Mask > Mode: Select [Mode] option on the [Day/Night] menu, then select the following mode. Auto: [Day/Night] mode changes automatically. Day: Color mode enabled. This function is aiming at the protection of personal privacy. The Night: Black-and-white mode enabled. selected part is not displayed on the screen.
- Page 15 Function: Displays or removes the Function OSD on the • In case of LW9422 series, if you set the [Maximum Frame screen. Click [On] or [Off ] button to set up the [Function] rate] of master stream over than 20 fps under the 1920 x Option.
- Page 16 Audio Region Of Interest Audio In > Enable: Click the check box if you want to send the audio from the microphone input connector. Note: The Clients connected to the IP device remain unaffected with additional changes made in the setting. >...
- Page 17 PTZ Configuation 3. Set the Pan, Tilt, Zoom or Focus speed options. 4. Click the [Save] button to confirm the settings. Allows the user to configure different PTZ controls by using different PTZ protocols. Preset Preset position is the function to register camera monitoring positions (preset positions) associated with position numbers.
- Page 18 Auto pan > Target Size You can play the camera with auto pan function. Small: Make images about 1/4 of the object using Zoom feature. > To set the Auto Pan position Medium: Make images about 1/2 of the object using 1.
-
Page 19: Network Settings
Network settings RTP stream RTP (Real-time Transport Protocol) is an internet protocol that allows programs to manage the real-time transmission of multimedia data, Basic via unicast or multicast. General Profile > MAC address: Displays the MAC address. > RTP unicast: When enabled the transmission of the data to Port &... - Page 20 TCP/IP DDNS This free service is very useful when combined with the LG DDNS Server. It allows the user to connect the IP device using the URL, rather than an IP Address. This also solves the problem of having a dynamic IP address.
- Page 21 Note: If you want to deny or to allow a range of IP addresses, enter You can specify network Quality of Service (QoS) settings. the start IP address to “From” and the end IP address to “To”. You can also add an IP address by entering the same IP address to “From”...
-
Page 22: User Settings
SIP (LNP2810, LNP2810T, LNP3020T) User settings Basic The IP device is shipped with the login rights of administrator only. If others need to access the IP device excluding the configuration a login with viewer rights need to be created. A maximum of 50 users can be created. -
Page 23: Event Settings
Event settings Anonymous > Enable anonymous login Event Server Check the box to enable anonymous user login - allows the user access for only viewing the live stream image. Event Servers are used to receive the recorded video clip and/or notification messages. - Page 24 Motion detect network. Receiving address: Type the recipients e-mail address. You can specify only one recipient e-mail address. Administrator address: Type the e-mail address of the administrator. Subject: Enter the subject/title of the e-mail. Message: This message can describe the information of the acquired IP address, etc.
- Page 25 Triggered Event Scheduled Event When an event (VA/ Motion detect/ Sensor Event) occurs, this unit records the live images and routes as configured. Activation Time > Always : You can use always by using the FTP server Event schedule list regardless of activation time.
-
Page 26: Osd Menu Setup
OSD Menu Setup SPECIAL FREEZE ON/OFF The following table shows the list of menu items and options. COLOR This feature applies in LW9422 series only. COLOR LEVEL -50 to 50 Note: SHARPNESS 0 to 68 The top side of screen may be hidden by tilting range. -
Page 27: General Operation
General Operation Focus setting 1. Click the [OSD control] button on the LG Smart Web Viewer. 2. Click button on the OSD control window. The camera setting menu appears on the live view window. The camera adjusts the focus automatically by sensing the center of the picture. -
Page 28: Exposure Settings
Exposure settings Note: If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu or [AGC] to [OFF], the [SENS-UP] setting is not available and [---] mark is displayed. White Balance settings Select the method by which the camera shifts its output colors to compensate for the color of a light source. -
Page 29: Day/Night Settings
Day/Night settings 3D-DNR setting 1. Select [DAY/NIGHT] option. 1. Select [3D-DNR] option. 2. Use button to select a mode for DAY/NIGHT function. If pictures are not clear due to noise, this option would reduce the noise of picture. • AUTO: DAY/NIGHT mode changes automatically. 2. -
Page 30: Special Menu Settings
Special menu settings > Use button to select a character or number then click button. FREEZE CLR: Clear all entered characters and numbers. 1. Select the [FREEZE] option on the [SPECIAL] menu. POS: Move the USER TITLE position on the screen 2. -
Page 31: Reset Setting
Reset setting 1. Select the [RESET] option. 2. Click button and the RESET menu appears. 3. Use button to select option. • FACTORY RESET: Clear certain settings and information and return to factory default settings. • S/W VERSION: Displays the software version on the monitor. 4. -
Page 32: Reference
• IP Conflicts: If the LG network device is set with a static IP address and if the DHCP option is set then there may be IP’s same as the network device and other network partner. Hence set the static IP address to 0.0.0.0 to resolve this conflict. -
Page 33: Open Source Software Notice
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. -
Page 34: Specifications
10/100 Ethernet Protocol IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS (LG) Open Protocol ONVIF 2.2 Profile S, PSIA 1.1 Remote S/W LVi510, Mobile Application (iPhone, Android, iPad) Pan/Tilt Travel Range Pan : 360˚(Endless), Tilt : 180˚... - Page 35 10/100 Ethernet Protocol IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS (LG) Open Protocol ONVIF 2.2 Profile S, PSIA 1.1 Remote S/W LVi510, Mobile Application (iPhone, Android, iPad) Pan/Tilt Travel Range Pan : 360˚(Endless), Tilt : 180˚...
- Page 36 10/100 Ethernet Protocol IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS (LG) Open Protocol ONVIF 2.2 Profile S, PSIA 1.1 Remote S/W LVi510, Mobile Application (iPhone, Android, iPad) Pan/Tilt Travel Range Pan : 360˚(Endless), Tilt : 180˚...
- Page 37 IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP Network Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 10 Power Source AC 24 V, PoE+...
Need help?
Do you have a question about the LW9422 series and is the answer not in the manual?
Questions and answers