Page 1
OWNER’S MANUAL Network Camera Please read this manual carefully before operating your set and retain it for future reference. MODELS LND3110R LND3210R LND3220R LNU3110R LNU3210R LNU3220R 1501 (V3.0)
Recommended PC Requirements ...........4 Accessing the LG IP device..............5 LG Smart Web Viewer Overview ............6 Configuration menu overview ..........7 Configuring the LG Network Camera Device ......7 Accessing the Configuration menu .........7 System settings ...............8 Audio & Video settings ............10 Network settings ..............14 User settings .................18...
Introduction The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual contains instructions on how to install and manage the LG Network Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader.
Before using the system Recommended PC Requirements • Before using the LG IP device make sure the connections are The LG IP device can be used with most standard operating systems correct and verify whether proper power supply is used. and browsers. •...
Logging in to the LG Smart Web Viewer Run the IP Utility and find the LG IP devices. You can access the LG IP device by following the below steps. When the LG IP devices appear in the IP Utility...
You can monitor the camera selecting options. (Top Left / Top Right) image on the live view window of the LG Video Analysis Smart Web Viewer. > Hide: Video Analysis display function is not in use.
Smart Analytics Triggered Event Scheduled Event Configuring the LG Network Camera Device The features and options of the LG IP camera are configured through the Configuration menu. Only administrator-level users have permission to access the Configuration menu. Accessing the Configuration menu Click the [Configuration] button to display the LG Smart Web Viewer configuration window.
System settings Maintenance Version Displays the current Model Name and Software version. System reboot Click the [Reboot] button to restart the IP device. It takes some Note: minutes for the IP device to start again. Click OSS(Open source software) link to check the information Backup &...
Page 9
Language list The System log provides a summary of the status of the IP device. Select a language for the LG Smart Web Viewer configuration menu The unit records the data of the software activity in a file. and information display.
> AGC: If the images are too dark, change the maximum [AGC] value to make the images bright. > Capture Mode (LND3110R / LNU3110R only): Select the > Brightness: Adjust the brightness of images. capture mode.
Page 11
White Balance Day/Night > Mode: Select [Mode] option on the [White Balance] menu, then select the following mode. > Mode: Select [Mode] option on the [Day/Night] menu, then Auto: Adjust the white balance of the full image area. select the following mode. Use this function in the environment by special lighting Auto: [Day/Night] mode can be changed automatically lamp.
Page 12
Image > Mode > Noise Reduction: If pictures are not clear due to noise, this On: When the [Day/Night] menu set to [Night] mode, option would reduce the noise of picture. When you use this the IR LED will be turned on. The [Level] is displayed. function, the afterimage may occur.
Page 13
Stream LND3210R / LNU3210R / LND3220R / LNU3220R only LND3110R / LNU3110R only Resolution > HD: Displays the maximum image size of the camera. > SD: Select the output image size of the camera. Master/Slave Profile > Enable: Click to activate the stream function.
Network settings Region Of Interest Basic General > MAC address: Displays the MAC address. Port & Encryption > Network encryption: Select the HTTP or HTTPS option for security. > Smart Port Setting: Select [On] to allocate a port number automatically. You can set and streaming the desired area on the live view window Note: to use ROI(Region Of Interest) function.
Page 15
2 profiles use same multicast IP address, each [Base RTP port] number should be distinguished from the LND3110R / LNU3110R only other port number more than 6 at least. Multicast > Always Multicast: Check to enable multicast regardless of client connection.
Page 16
TCP/IP DDNS This free service is very useful when combined with the LG DDNS Server. It allows the user to connect the IP device using the URL, rather than an IP Address. This also solves the problem of having a dynamic IP address.
Page 17
IP filtering SNMP The access of the IP addresses in the list are allowed or denied The Simple Network Management Protocol (SNMP) is an application according to the choice made in the drop-down list of the Basic protocol to exchange the management information of network policy option.
802.1x User settings Specifies whether 802.1x network access is enabled. Basic The IP device is shipped with the login rights of administrator only. If others need to access the IP device excluding the configuration a login with viewer rights need to be created. A maximum of 50 users can be created.
Event Servers are used to receive the recorded video clip and/or notification messages. The connections depend on the stream configuration as shown in the following Maximum RTP stream connection by stream configuration. LND3110R / LNU3110R only Video Frame Maximum RTP Resolution...
Page 20
Motion detect Enable SSL: Check when use the SSL (Secure Socket Layer) protocol. SSL protocol is cryptographic protocols that provide secure communication on a network. Receiving address: Type the recipients e-mail address. You can specify only one recipient e-mail address. Administrator address: Type the e-mail address of the administrator.
Page 21
Smart Analytics Triggered Event When an event (VA / Motion detect) occurs, this unit records the live images and routes as configured. Event schedule list > To edit the Event Schedule 1. Select the Trigger event and click the [Edit] button. Event schedule window is displayed.
Page 22
Scheduled Event Activation Time > Always : You can use always by using the FTP server regardless of activation time. > Only scheduled time: Continuously record according to the set time and the selected weekday. Action Set the below option. >...
• IP Conflicts: If the LG network device is set with a static IP address and if the DHCP option is set then there may be IP’s same as the network device and other network partner. Hence set the static IP address to 0.0.0.0 to resolve this conflict.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
IPv4 and IPv6: TCP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP Network Protocol IPv4: FTP, SMTP, NTP, ARP, SNMPv1/v2c/v3, DDNS(LG) Connections Up to 10 Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Power Source DC 12 V Maximum Power 5.4 W Consumption Maximum Input Current...
Page 26
IPv4 and IPv6: TCP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP Network Protocol IPv4: FTP, SMTP, NTP, ARP, SNMPv1/v2c/v3, DDNS(LG) Connections Up to 10 Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Power Source DC 12 V Maximum Power 6.1 W Consumption Maximum Input Current...
Page 27
IPv4 and IPv6: TCP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP Protocol IPv4: FTP, SMTP, NTP, ARP, SNMPv1/v2c/v3, DDNS(LG) Connections Up to 10 Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Power Source DC 12 V Maximum Power 5.4 W Consumption...
Page 28
IPv4 and IPv6: TCP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP Protocol IPv4: FTP, SMTP, NTP, ARP, SNMPv1/v2c/v3, DDNS(LG) Connections Up to 10 Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Power Source DC 12 V Maximum Power 6.1 W Consumption...
Page 29
IPv4: FTP, SMTP, NTP, ARP, SNMPv1/v2c/v3, DDNS(LG) Connections Up to 10 Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Power Source DC 12 V, PoE Maximum Power 5.4W (DC 12 V), 5.9 W (PoE 48 V)
Page 30
IPv4: FTP, SMTP, NTP, ARP, SNMPv1/v2c/v3, DDNS(LG) Connections Up to 10 Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Power Source DC 12 V, PoE Maximum Power 6.1 W (DC 12 V), 6.9 W (PoE 48 V)
Need help?
Do you have a question about the LNU3110R and is the answer not in the manual?
Questions and answers