Table of Contents
Advertisement
Audio & Video settings
Camera
Preview
You can preview the camera image on the preview window.
General
> Contrast: Edit the contrast value from 0 to 100.
Selecting 100 provides the image with the highest
contrast.
> Brightness: Edit the brightness of the camera. It is
brighter when a large value is selected and it is dark-
er when a small value is selected.
> Standard: Displays the video standard of the camera.
> Hue: Edit the video Hue of the camera from 0 to 100.
•
Save: Click this button to confirm the settings.
•
Default: Click this button to restore the IP device back to
original factory settings.
Operation and settings
Stream
Master/Slave
> Enable: Click to activate the stream function.
> Deinterlacing: Click to enable the use of deinterlac-
ing function.
> Video codec: Select the video mode (Codec) from
the drop-down list. The viewer can choose between
MJPEG and H.264.
> Resolution: Select the image size to be sent from the
camera.
D1 (704 x 480), HALF D1 (704 x 240),
NTSC
CIF (352 x 240) and QCIF (176 x 112)
D1 (704 x 576), HALF D1 (704 x 288),
PAL
CIF (352 x 288) and QCIF (176 x 144)
> Maximum frame rate: Set the frame rate of the
image. Selectable values of the frame rates are as
follows.
NTSC
1 to 30 (fps)
PAL
1 to 25 (fps)
29
Advertisement
Table of Contents
