Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for LG LNB7210
Summary of Contents for LG LNB7210
- Page 1 OWNER’S MANUAL Network Camera Please read this manual carefully before operating your set and retain it for future reference. MODELS LNB7210 LNV7210 LNV5110R LNV7210R LNV7210RH LNB5110 LND7210 LND5110R LND7210R LNU7210RH LND5110 LNU5110R LNU7210R 1503 (V1.8)
-
Page 2: Table Of Contents
Recommended PC Requirements ...........4 Accessing the LG IP device..............5 LG Smart Web Viewer Overview ............6 Configuration menu overview ..........7 Configuring the LG Network Camera Device ......7 Accessing the Configuration menu .........7 System settings ...............8 Audio & Video settings ............11 Network settings ..............19 User settings .................22... -
Page 3: Introduction
Introduction The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual contains instructions on how to install and manage the LG Network Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader. -
Page 4: Operation And Settings
Before using the system Recommended PC Requirements • Before using the LG IP device make sure the connections are The LG IP device can be used with most standard operating systems correct and verify whether proper power supply is used. and browsers. •... -
Page 5: Accessing The Lg Ip Device
Logging in to the LG Smart Web Viewer Run the IP Utility and find the LG IP devices. You can access the LG IP device by following the below steps. When the LG IP devices appear in the IP Utility... -
Page 6: Lg Smart Web Viewer Overview
If you want to exit the Configuration > SVA: Displays the Smart Video menu, select one of the video stream in Analysis function to the live view the Live view drop-down list or click LG window. Smart IP Device icon. >... -
Page 7: Configuration Menu Overview
On/Off. Device (Color icon: On, Gray scale icon: Off.) The features and options of the LG IP camera are configured Click this button to switch the sound through the Configuration menu. off and on, for the speaker of the Only administrator-level users have permission to access the computer. -
Page 8: System Settings
System settings Maintenance Version Displays the current Model Name, Software, ISP and MCU version. System reboot Click the [Reboot] button to restart the IP device. It takes some minutes for the IP device to start again. Note: Backup and restore Click OSS(Open source software) link to check the information >... - Page 9 SD card has insufficient space. 2. Click the [Mount] button. If the micro SD card is mount- • The downloaded file can be played by using the LG File ed to the system correctly, the [Mount] button will be player.
- Page 10 Capture Mode 16:9 4:3 or 5:4 Font Size Column Column Applicable model: LNB7210 / LNV7210 / LND7210 / Preview LNV7210R / LND7210R / LNU7210R / LNV7210RH / You can preview the camera image on the preview window. LNU7210RH Mode Font Size Column >...
-
Page 11: Audio & Video Settings
Depending on the set step value, PTZ movement can be flinch for a second. Install Language list Select a language for the LG Smart Web Viewer configuration menu and information display. • Save: Click this button to confirm the settings. - Page 12 Focus (Applicable model: LND5110 / LNV5110R / LND5110R / On / Pivot 25 or 30 LNU5110R / LNV7210 / LND7210 / LNV7210R / LND7210R / LNU7210R / LNV7210RH / LNU7210RH) High 50 or 60 Framerate > Capture Mode (Applicable model: LND5110 / LNV5110R / LND5110R / LNU5110R / LNB5110): Select the capture mode.
- Page 13 Focus (Applicable model: LNB7210) Exposure > Auto: Select [Auto] option on the [Focus] menu, then select the following mode. Focus Push: This function will be activated automatically to adjust the focus. Focus Reset: The focus position is located at factory >...
- Page 14 White Balance 1/10 000 1/5 000 1/2 500 1/1 500 1/1 000 1/700 1/500 1/480 1/400 1/360 1/300 1/250 1/240 1/180 1/150 Maximum Shutter 1/120 1/100 1/60 1/50 1/30 1/25 1/20 1/15 > Flickerless: Remove the band noise caused by fluorescent light.
- Page 15 Day/Night • Set the type of [Sensor] according to External Sensor type. The Day/Night mode is converted as below table. Sensor Type Alarm Mode High Normal Open Night High Night Normal Close • If the difference of value between the [Day >> Night] and [Night >>...
- Page 16 SmartIR (Applicable model: LNV7210R / LND7210R / LNU7210R / Image LNV7210RH / LNU7210RH) > Noise Reduction: If pictures are not clear due to noise, this SmartIR (Applicable model: LNV5110R / LND5110R / LNU5110R) option would reduce the noise of picture. When you use this function, the afterimage may occur.
- Page 17 Smart Codec settings area is not maintained by the screen change by the operation of Pan / Tilt / Zoom. Applicable model: LNB7210 / LNV7210 / LND7210 / When reset the Pan / Tilt / Zoom, you need to reset the LNV7210R / LND7210R / LNU7210R / Smart Codec settings area also.
- Page 18 Audio PTZ config (Optional) Audio In > Enable: Click the check box if you want to send the audio PTZ protocol list from the microphone input connector. > PTZ protocol: Displays the selected PTZ protocol. Note: PTZ configuration The Clients connected to the IP device remain unaffected with additional changes made in the setting.
-
Page 19: Network Settings
Preset (Optional) Network settings Basic Preset Displays the registered preset position. 1. Move the camera to the point you want by using the arrow General buttons. > MAC address: Displays the MAC address. 2. Set the Pan, Tilt, Zoom or Focus step options. Port &... - Page 20 RTP stream TCP/IP RTP (Real-time Transport Protocol) is an internet protocol that allows programs to manage the real-time transmission of multimedia data, via unicast or multicast. IPv4 address status Profile > Automatically set with DHCP: Select this option when a DHCP server is installed on the network to allow IP address >...
- Page 21 DDNS Note: This free service is very useful when combined with the LG DDNS If you want to deny or to allow a range of IP addresses, enter Server. It allows the user to connect the IP device using the URL, the start IP address to “From”...
-
Page 22: User Settings
User settings You can specify network Quality of Service (QoS) settings. Basic The IP device is shipped with the login rights of administrator only. If others need to access the IP device excluding the configuration a login with viewer rights need to be created. A maximum of 50 users can be created. -
Page 23: Event Settings
Address: Enter the FTP server’s IP address. Port: Enter the port number. The default FTP port is Applicable model: LNB7210 / LNV7210 / LND7210 / LNV7210R / LND7210R / LNU7210R / User ID: Type the user name for the Folder shared in LNV7210RH / LNU7210RH the FTP server. - Page 24 Sensor & Relay network. Receiving address: Type the recipients e-mail address. You can specify only one recipient e-mail address. Administrator address: Type the e-mail address of the administrator. Subject: Enter the subject/title of the e-mail. Message: This message can describe the information of the acquired IP address, etc.
- Page 25 Motion Detect Audio detect Audio Detection > Enable: Set to [ON] or [OFF]. The Basic Configuration menu is displayed when selects [ON]. Preview Basic Configuration You can preview the motion detection window on the preview > Level: Select the level of audio detection from the window.
- Page 26 When detection occurs, the text is displayed at the right of detection configuration. (“Detected” or “Not Detected”) Move camera to (Applicable model: [Sensor] in LNB7210): Write the number of the preset, the • When the area setting and activating of [Object Removal]...
- Page 27 Scheduled Event Activation Time > Always : You can use always by using the FTP server regardless of activation time. > Only scheduled time: Continuously record according to the set time and the selected weekday. Drag and drop with left button of the mouse to set the channel and time you want to record.
-
Page 28: Reference
• IP Conflicts: If the LG network device is set with a static IP address and if the DHCP option is set then there may be IP’s same as the network device and other network partner. Hence set the static IP address to 0.0.0.0 to resolve this conflict. -
Page 29: Open Source Software Notice
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. -
Page 30: Specifications
IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 20 Power Source DC 12 V, PoE Maximum Power 6.9 W... - Page 31 IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 20 Power Source DC 12 V, PoE Maximum Power 5.9 W...
- Page 32 IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile App (iPhone, iPad, Android) Connections Up to 20 Power Source DC 12 V, PoE Maximum Power 5.9 W...
- Page 33 IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 20 Power Source DC 12 V, PoE Maximum Power 8.2 W...
- Page 34 Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 20 Power Source AC 24 V, DC 12 V, PoE Maximum Power 10.6 W...
- Page 35 IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 20 Power Source DC 12 V, PoE Maximum Power 8.7 W (DC 12 V), 10.4 W (PoE 48 V)
- Page 36 IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 20 Power Source DC 12 V, PoE Maximum Power 8.7 W (DC 12 V), 10.4 W (PoE 48 V)
- Page 37 Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 20 Power Source AC 24 V, DC 12 V, PoE Maximum Power 10.6 W (AC 24 V), 9.1 W (DC 12 V), 9.6 W (PoE)
- Page 38 IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 20 Power Source DC 12 V, PoE Maximum Power 11.4 W (DC 12 V), 12.8 W (PoE)
- Page 39 Network UPnP port forwarding Protocol IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Integrated Software LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android) Connections Up to 20 Power Source AC 24 V, DC 12 V, PoE Maximum Power 13.5 W (AC 24 V), 11.4 W (DC 12 V), 12.8 W (PoE)