Quick Access To System Information; Connecting Cameras; Camera Compatibility; About Lorex Mpx Cameras - FLIR Lorex LHV2000FS Series Instruction Manual

5 Basic Setup (LHV2000 Series)

5.10 Quick Access to System Information

To quickly open a window that displays vital system information:
• Right-click to open the Quick Menu and click Info. Enter the system user name (default:
admin) and password (default: 000000).
OR
• Press the button on the front panel.
OR
• Press the ENTER button on the remote control.
NOTE
The QR code shown in the System Info screen can be scanned during mobile setup to enter the sys-
tem's Device ID.

5.11 Connecting Cameras

5.11.1 Camera Compatibility

This system is compatible with 1080p MPX, 720p HD, and analog cameras. For a list of
compatible cameras, please visit www.lorextechnology.com/support.

5.11.2 About Lorex MPX Cameras

Lorex MPX cameras transmit high-definition video over BNC cable (such as RG59). They
use analog signals and can transmit video signals over long cable runs.
Lorex MPX cameras use a proprietary analog standard that only works with Lorex MPX
DVRs. MPX is not compatible with HD-SDI equipment.

5.11.3 Installing Cameras

CAUTION
Cameras differ in terms of installation or mounting instructions. Please see the documentation that came
with your camera(s) for specific installation instructions.
Installation Tips
• Test the cameras before permanent installation. Plan where you will route the wiring for
the camera and where you will aim the camera.
• Mount the camera where the lens is away from direct and intense sunlight.
• Plan your cable wiring so that it does not interfere with power lines or telephone lines.
• Ensure that the camera wiring is not exposed or easily cut.
• Mount the camera in an area that is visible, but out of reach.
#LX400060; r.36893/36903; en-US
12