Table of Contents
Advertisement
14
Using the Main Menu
The Record Info menu shows the start and end times of recordings saved on the hard
drive.
To access the Record Info menu:
• From the Main Menu, click
14.2.3 Version
The Version sub-menu allows you to view information about the current firmware installed
on the system.
To access the Version menu:
• From the Main Menu, click
14.2.4 Alarm Status
The Alarm Status menu shows you a display of system alarms. Activated alarms are high-
lighted in white. Additional info is shown, such as channels that are currently detecting
motion.
The following alarms are shown in the Alarm Status menu:
• No HDD: No hard drive is detected.
• Disk Error: Hard drive error detected.
• Disk Full: Hard drive is full.
• Net Disconnection: System is not connected to the network.
• IP Conflict: More than one device on the network is using the same IP address.
• MAC Conflict: More than one device on the network is using the same MAC address.
• Video Loss: Shows disconnected channels.
• Motion: Shows channels with active motion alarms.
#LX400060; r.36893/36903; en-US
and then select Info>Record Info.
and then click Info>Version.
53
Advertisement
Table of Contents
