Table of Contents
Advertisement
SUPERSERVER 2027TR-H70RF/H70FRF/H70QRF USER'S MANUAL
6-11 Power Supply
The SC217 chassis includes two 1620 Watt power supplies. This power supply is
auto-switching capable. This enables it to automatically sense and operate at a
100v to 240v input voltage. An amber light will be illuminated on the power supply
when the power is off. An illuminated green light indicates that the power supply
is operating.
Power Supply Replacement
The SC217 chassis utilizes two redundant power supplies. In the unlikely event that
the power supply unit needs to be replaced, one power supply can be removed,
without powering down the system. Replacement units can be ordered directly from
Supermicro (See the contact information in the Preface of this manual).
Changing the Power Supply
1. Push the release tab (on the back of the power supply) as illustrated.
2. Pull the power supply out using the handle provided.
3. Push the new power supply module into the power bay until it clicks into the
locked position.
Release Tab
Figure 6-19. Changing the Power Supply
6-20
Advertisement
Table of Contents
