SUPERSERVER 2028TP-HTR/HTTR/HTFR USER'S MANUAL
6-11 Power Supply
The SC217HQ+ chassis includes two 2000 Watt power supplies. This power supply
is auto-switching capable. This enables it to automatically sense and operate at a
100v to 240v input voltage. An amber light will be illuminated on the power supply
when the power is off. An illuminated green light indicates that the power supply
is operating.
Power Supply Replacement
The SC217HQ+ chassis utilizes two redundant, hot-plug power supplies. In the
unlikely event that the power supply unit needs to be replaced, one power supply can
be removed, without powering down the system. Replacement units can be ordered
directly from Supermicro (See the contact information in the Preface of this manual).
Changing the Power Supply
1. Push the release tab (on the back of the power supply) as illustrated.
2. Pull the power supply out using the handle provided.
3. Push the new power supply module into the power bay until it clicks into the
locked position.
Release Tab
Figure 6-18. Changing the Power Supply
6-20