SUPERSERVER 2027TR-H70RF/H70FRF/H70QRF USER'S MANUAL
2-5
Installing the System into a Rack
This section provides information on installing the 2027TR-H70RF/H70FRF/H70QRF
into a rack unit with the rails provided. There are a variety of rack units on the market,
which may mean that the assembly procedure will differ slightly from the instructions
provided. You should also refer to the installation instructions that came with the
rack unit you are using. NOTE: This rail will fi t a rack between 26.5" and 36.4" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of three sections: An inner chassis rail which secures directly to
the chassis, an outer rail that secures to the rack, and a middle rail which extends
from the outer rail (see Figure 2-1). These assemblies are specifi cally designed for
the left and right side of the chassis.
Figure 2-1: Identifying the Outer Rail, Middle Rail and Inner Rails
Rail Assembly
(Shown with Rails
Retracted)
This Side Faces
(Left Rail Assembly Shown)
Outward
2-4
Outer Rail
Middle Rail
Locking Tab
Inner Rail