Table of Contents
Advertisement
A+ SERVER 2022TG-H6IBQRF/H6RF USER'S MANUAL
6-11 Power Supply
Depending on your chassis model, the SC827 chassis will include two 1620 Watts
power supplies. This power supply is auto-switching capable. This enables it to
automatically sense and operate at a 100v to 240v input voltage. An amber light
will be illuminated on the power supply when the power is off. An illuminated green
light indicates that the power supply is operating.
Power Supply Replacement
The SC827 chassis utilizes two redundant power supplies. In the unlikely event that
the power supply unit needs to be replaced, one power supply can be removed,
without powering down the system. Replacement units can be ordered directly from
Supermicro (See the contact information in the Preface of this manual).
Changing the Power Supply
1. Push the release tab (on the back of the power supply) as illustrated in
Figure 6-20.
2. Pull the power supply out using the handle provided.
3. Push the new power supply module into the power bay until it clicks into the
locked position.
6-20
Advertisement
Table of Contents
