A+ SERVER 4042G-6RF/TRF User's Manual
1-3
Server Chassis Features
The following is a general outline of the main features of the SC748TS-R1400BP
server chassis.
System Power
The SC748TS-R1400BP features a redundant (two separate power modules)
1400W high-effi ciency power supply with I2C. This power redundancy feature allows
you to replace a failed power supply without shutting down the system.
SAS/SATA Subsystem
The SC748TS-R1400BP chassis was designed to support fi ve hot-swappable SAS/
SATA hard drives.
Front Control Panel
The control panel on the A+ SERVER 4042G-6RF/TRF provides you with system
monitoring and control. LEDs indicate system power, HDD activity, network activity,
system overheat and power supply failure. A main power button and a system reset
button are also included. In addition, two USB ports have been incorporated into
the front of the chassis for convenient access.
I/O Backplane
The SC748TS-R1400BP is an tower chassis that can also be used in a 4U
rackmount confi guration. The I/O backplane provides seven PCI expansion slots,
one COM port, a VGA port, two USB 2.0 ports, PS/2 mouse and keyboard ports
and two Gb Ethernet ports.
Cooling System
Three 8-cm hot-swap system cooling fans located in the middle section of the
chassis and three 8-cm hot-swap exhaust fans are used to cool the system. An air
shroud channels the airfl ow from the system fans to effi ciently cool the processors
and DIMMs. Each power supply module also include a cooling fan.
1-4