Assembly Instructions - Body Solid GYR500 Assembly Instructions & Owner's Manual

S T E P
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Wrench tighten ALL hardware at the end until the
last step. Some components may be pre-assembled.
1A. Attach Base Frame (B) to two Upright Frames (C) using:
4 - (#1) M8x55mm Button Head Cap Screw
4 - (#2) Ø8.5xØ30x1.5mm Flat Washer
1B. Attach Center Frames (A) to two Upright Frames (C) using:
8 - (#1) M8x55mm Button Head Cap Screw
8 - (#2) Ø8.5xØ30x1.5mm Flat Washer
8