Advertisement
S T E P
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until instructed.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tighten to fully go on.
1A. Attach Left Frame (A), Right Frames (B) and Center Bars (C)
together using:
14 - (#2) M10x65mm Hex Head Bolt
14 - (#3) M10x20mm Button Head Cap Screw
42 - (#5) M10 Flat Washer
14 - (#7) M10 Nylon Lock Nut
10
Advertisement
