Supermicro Supero C7Z270-CG-M User Manual page 29

Connector
Audio FP
BT1
COM1
Sys Fan 1,2 CPU Fan 1,2
JD1
JF1
JL1
TH1
JPW1
JPW2
JSD1
JSPDIF_OUT
JSTBY1
I-SATA0~5
USB 0/1
USB 8/9 (3.0)
PCI-E M.2 Connector 1, 2
JTPM1
LED Description
Power On
LED1 S3 (Suspend to RAM)
LED
LED2 PCIE M.2 #1 LED
LED4 Status Code LED
LED5 PCIE M.2 #2 LED
LED10~12 PCH LED
*Download the AMI status codes at
Front Panel Audio Header
Onboard Battery
COM1 Port Header
System/CPU Fan Headers
Pins 1~4: External Speaker
Front Panel Control Header
Chassis Intrusion Header
Header for a thermistor type sensor
24-pin ATX Main Power Connector (Required)
+12V 8-pin CPU power Connector (Required)
SATA DOM (Disk On Module) Power Connector
Sony/Philips Digital Interchange Format (S/PDIF) Out Header
Standby Power Header
(Intel Z270) Serial ATA (SATA 3.0) Ports 0~5 (6Gb/sec)
Front Panel Accessible USB 2.0 Headers
Front Panel Accessible USB 3.0 Header
PCIE M.2 Connectors 1 and 2, small form factor devices and other
portable devices for High speed NVMe SSDs
Trusted Platform Module (TPM) Header
Color/State
Power On: Green On
S3: Green, Blinking
Green/Activity: Green, Blinking
Digital Readout
Green/Activity: Green, Blinking
Power On: White On
S3/S4: Off
http://www.ami.com/support/doc/ami_aptio_4.x_status_codes_pub.pdf
1-11
Chapter 1: Introduction
Description
Status
See manual
PCIE device detected
See manual
PCIE device detected
See manual