Sata Controllers; Sata Mode Selection; Sata Controller Speed; Sata Frozen - Supermicro Supero C7Z270-CG-M User Manual

Supermicro C7Z270-CG-M Motherboard User's Manual

SATA Controllers

Select Disabled to disable the onboard SATA Controllers. The settings
are Enabled and Disabled.

SATA Mode Selection

This item selects the mode for the installed SATA drives. The options are
AHCI and Intel RST Premium.

SATA Controller Speed

Use this option to specify the maximum speed the SATA controller can
support. The options are Default, Gen 1, Gen 2, and Gen 3.

SATA Frozen

Select Disabled to disable the Freeze Lock Security feature. The settings
are Enabled and Disabled.
The remaining options in the section are similar across Serial ATA
Ports 0 through 5.

Serial ATA Port 0~5

This item dispays the detected SATA drive, if any.

Hot Plug

This feature designates the port specified for hot plugging. Set this item
to Enabled for hot-plugging support, which will allow the user to replace
a SATA disk drive without shutting down the system. The options are
Enabled and Disabled.

Configured as eSATA

This item dispays the eSATA status for the detected hard drive.

Spin Up Device

When this option is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The settings are Enabled and Disabled.

SATA Device Type

Use this feature to identify the type of HDD that is connected to the STATA
port. The options are Hard Disk Drive and Solid State Drive.
4-46