Chapter 4: AMI BIOS
GT Voltage Offset
(if Offset is selected above) Use this feature to set the GT Adaptive
voltage Target(mV) value from 0mV to 2000mV. Enter 0 to use the
manufacture default value.
Offset Prefix
Use this feature to set the Offset value as a positive (+) number or
a negative (-) number. The default setting is "+".
GT Unslice Domain
GT OverClocking Frequency
This option selects the Overclocked RPO frequency in multiples of
50MHz. The default is 0.
GT Voltage Mode
Use this feature to select the Overclocking GT mode. The options are
Override, Offset, and Adaptive.
GT Extra Turbo Voltage
(if Adaptive is selected above) Use this feature to set the extra voltage
applied while GT is operating in trubo mode. Specify a value from 0mV
to 2000mV. Enter 0 to use the manufacture default value.
GT Voltage Offset
(if Offset is selected above) Use this feature to set the GT Adaptive
voltage Target(mV) value from 0mV to 2000mV. Enter 0 to use the
manufacture default value.
Offset Prefix
Use this feature to set the Offset value as a positive (+) number or
a negative (-) number. The default setting is "+".
GT-Sliced VR Settings
GT-Sliced Domain
VR Config Enable
Select Enable to activate VR configuration options. The options are
Enabled and Disabled.
4-41