Supermicro Supero C7Z270-CG-M User Manual page 143

4. After locating the new BIOS binary image, the system will enter the BIOS
Recovery menu as shown below.
Note: At this point, you may decide if you want to start with
BIOS Recovery. If you decide to proceed with BIOS Recovery,
follow the procedures below.
5. To continue with BIOS Recovery, select the item- "Proceed with flash update".
You will see the progress of BIOS Recovery as shown on the screens below.
Note: Do not interrupt the BIOS programming until it is com-
pleted.
6. After the BIOS Recovery process is complete, click OK to reboot the system.
Appendix C: UEFI BIOS Recovery
C-3