9.
Exit the DMS Network settings screen, and you are now ready to use your DMS-800PV.
WIFI SETUP USING IR REMOTE ONLY
1.
Place the DMS-800PV anywhere within the router's Wi-Fi range. Make sure the Wi-Fi antenna is connected. (Do
NOT connect the Ethernet cable).
2.
Turn on the DMS-800PV. Once on, press the Network Input Source on the IR remote. The following prompt will
display. Select "Connect to Wi-Fi with IR Remote."
3.
A prompt will appear confirming that you wish to search and set up a Wi-Fi Connection. Select YES.
4.
Select your Wi-Fi network and press Enter.
32