Table of Contents
Advertisement
3 How to get started (3D GigE G2)
Figure 3.9: PF_GEVPlayer start screen
2.
Click on the Select / Connect button in the PF_GEVPlayer . A window with all detected
devices appears (see Fig. 3.10). If your camera is not listed then select the box Show
unreachable GigE Vision Devices.
Figure 3.10: GEV Device Selection Procedure displaying the selected camera
3.
Select camera model to configure and click on Set IP Address....
.
22 of 131
MAN052 12/2018 V3.2
Advertisement
Table of Contents
