Operation Via Art-Net - Future light EYE-740 QCL ZOOM User Manual

Operation via Art-Net

For use via appropriate lighting control software supporting Art-Net. The device can be configured via the
control panel.
Data Connection
The device uses a RJ45 data connection for connection to a computer or a previous or subsequent device.
To link all data ports the wiring can be carried out according to the following two installation methods.
36/52
Interconnect the devices
with network cables. The
Ethernet ports can be
used as inputs and
outputs as desired.
Connect the first device in
the chain to the
computer's network card
(optionally through a
network switch) with a
network cable.
If needed, cables up to
100 meters long may be
used (point-to-point
connection provided).
Different lengths are
available as accessory.
Please refer to the
instructions under Control
Board.
00127396, Version 1.0