Table of Contents
Advertisement
FBIR Series | Surveillance Cameras
1.2 Accessing the microSD card slot (optional)
1.2.1 Installing the microSD card
1. Locate the lower cover on the bottom of the camera.
2. Remove the lower cover. This will allow you to access
the microSD slot.
3. Install your microSD card into its dedicated slot, and
assure it is properly secured.
4. Replace lower cover, and the installation is complete.
1.3 Adjusting the camera angle
6
Crucial evidence. Always.
1.2.2 Advantages of the microSD
The microSD card is a very useful tool for anyone
who wishes to have another way to back up storage,
or is on a budget and doesn't have a recorder. The
microSD card is placed inside of the camera, and can
hold a set amount of storage (dependent on size of
card) for any intended use, such as: video playback,
storage, backup etc.
The microSD card utilises "Edge Recording". This is
when the camera records video directly onto the in-
stalled card in the camera, instead of a separate NVR
or storage device. This gives the user more flexibility
in recording video.
Note: Having a standalone microSD card will not
assure that you have the same quality playback, nor
the capacity compared to a separate NVR or storage
device.
1. Use screwdriver found in accessories bag to
loosen screw.
2. Freely adjust the camera and find desired angle
of view.
3. Tighten screw with screwdriver until firmly
secured.
Advertisement
Table of Contents
