Table of Contents
Advertisement
Quick Links
Camera Quick Install Guide
VDIRFV2 Series
Available in 2.0MP & 4.0MP
Thank you for purchasing a VDIRFV2 Series CCTV Surveillance Camera.
This Quick Install Guide covers basic setup, installation and use of your surveillance system.
For the full user manual, instructional videos, tips on using your surveillance system &
warranty information, please visit: www.vip-vision.com
Applicable Models
VSIP2MPVDIRFV2
2.0MP H.265 WDR Infrared Fixed Wedge Dome (3.6mm)
VSIP4MPVDIRF2.8V2 4.0MP H.265 WDR Infrared Fixed Wedge Dome (2.8mm)
VSIP4MPVDIRF3.6V2 4.0MP H.265 WDR Infrared Fixed Wedge Dome (3.6mm)
VSIP4MPVDIRF6.0V2 4.0MP H.265 WDR Infrared Fixed Wedge Dome (6.0mm)
Version 290517
Advertisement
Table of Contents
Related Manuals for Vip-Vision VSIP2MPVDIRFV2
Summary of Contents for Vip-Vision VSIP2MPVDIRFV2
- Page 1 For the full user manual, instructional videos, tips on using your surveillance system & warranty information, please visit: www.vip-vision.com Applicable Models VSIP2MPVDIRFV2 2.0MP H.265 WDR Infrared Fixed Wedge Dome (3.6mm) VSIP4MPVDIRF2.8V2 4.0MP H.265 WDR Infrared Fixed Wedge Dome (2.8mm) VSIP4MPVDIRF3.6V2 4.0MP H.265 WDR Infrared Fixed Wedge Dome (3.6mm) VSIP4MPVDIRF6.0V2 4.0MP H.265 WDR Infrared Fixed Wedge Dome (6.0mm)
-
Page 2: Safety Information
Actual value of some data and the value provided in the manual may differ due to environmental differences, etc. • VIP Vision is not liable for any damages caused by operation which is not followed in the manual. Crucial evidence. Always. -
Page 3: Fcc Information
VDIRFV2 Series | Surveillance Cameras Operation and Daily Maintenance • Do not touch the heat dissipation component of the camera directly in order to avoid burns. • Do not dismantle the device; there is no component which can be fixed directly by users in the camera. Contact the supplier to replace desiccant if it becomes green. -
Page 4: Included Components
VDIRFV2 Series | Surveillance Cameras 1. Pre-install Information Included Components VDIRFV2 Series IP Camera Quick Start Guide Installation Accessories Bag: • Position installation map • Expansion bolts • Self-tapping screws • Screwdriver Dimensions Connection ports Port Name Function Internet access Network data in/out and PoE Power input Power input port (optional) -
Page 5: Camera Installation
VDIRFV2 Series | Surveillance Cameras 2. Camera Installation Here, will we walk through the installation process of your “VDIRFV2 Series” camera. We will show you how to set up and adjust your camera, all included components and how to get it up and run- ning. - Page 6 VDIRFV2 Series | Surveillance Cameras 1.2 Accessing the microSD card slot (optional) 1.2.1 Installing the microSD card 1. Locate the lower cover on the bottom of the camera and open it. 2. Install the microSD card into its dedicated slot, making sure it’s properly secured. 3.
-
Page 7: Adjusting The Camera Angle
VDIRFV2 Series | Surveillance Cameras 1.3 Adjusting the camera angle • Loosen the locking screw(s), the lens horizontal adjustment can be directly adjusted manually. • For vertical adjustment, get the inner hex wrench and insert into the lens surface, then rotate it to adjust. •... - Page 8 If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. Your local VIP Vision™ IP solutions professional: www.activeonline.com.au 1300 816 742 For the full user manual, instructional videos, tips for using your surveillance system and warranty information, please visit: www.vip-vision.com...
Need help?
Do you have a question about the VSIP2MPVDIRFV2 and is the answer not in the manual?
Questions and answers