Table of Contents
Advertisement
FBIR Series | Surveillance Cameras
1. Installing the camera
Here will we walk through the installation process for your ''FBIR Series'' camera. We will show you how to set-up
your equipment, how to adjust it, all of its components and how to get it up and running. Be sure to check the
pre-install to have an understanding of the included components, dimensions, and connection ports.
1.1 Installation setup (See image above)
1. Position installation map found in accessories bag onto a wall or ceiling and dig holes where marked.
2. Take out expansion bolts from the accessories bag and insert them into the holes you just made.
3. Take out locking screws from accessories bag and tighten them to fix the camera onto the surface. After tightening,
you can now adjust the camera to suit you.
4. Install microSD card (optional) (1.2).
5. Adjust monitoring direction of the device (1.3).
6. Apply waterproofing to network cable (1.4) and then plug in all necessary ports (shown in pre-install).
7. Setup your alarm system (1.5).
8. Your setup is complete!
5
www.vip-vision.com
Advertisement
Table of Contents
