User Account Add/Edit - ZyXEL Communications EX3510-B0 User Manual

Table 108 Maintenance > User Account (continued)
LABEL
Retry Times
Idle Timeout
Lock Period
Group
Modify
Cancel
Apply

28.2.1 User Account Add/Edit

Click Add New Account or the Edit icon of an existing account in the Maintenance > User Account to
open the following screen.
Figure 155 Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Table 109 Maintenance > User Account > Add/Edit
LABEL
Active
User Name
Chapter 28 User Account
DESCRIPTION
This field displays the number of times consecutive wrong passwords can be entered for this
account. 0 means there is no limit.
This field displays the length of inactive time before the Zyxel Device will automatically log the
user out of the Web Configurator.
This field displays the length of time a user must wait before attempting to log in again after a
number of consecutive wrong passwords have been entered as defined in Retry Times.
This field displays whether this user has Administrator or User privileges.
Click the Edit icon to configure the entry.
Click the Delete icon to remove the entry.
Click Cancel to restore the default or previously saved settings.
Click Apply to save your changes.
DESCRIPTION
Select Enable or Disable to activate or deactivate the user account.
Enter a new name for the account. The User Name must contain 1 to 15 characters, including 0
to 9, a to z, and !@#%*()-_+=~,.{}[]\. Spaces are not allowed.
EX3510-B0 User's Guide
242