Mac Authentication - ZyXEL Communications EX3510-B0 User Manual

Table 23 Network Setting > Wireless > Guest/More AP > Edit (continued)
LABEL
Cancel
OK

7.4 MAC Authentication

This screen allows you to configure the Zyxel Device to give exclusive access to specific devices (Allow)
or exclude specific devices from accessing the Zyxel Device (Deny) based on the device(s) MAC
address. Every Ethernet device has a unique MAC (Media Access Control) address. It is assigned at the
factory and consists of six pairs of hexadecimal characters; for example, 00:A0:C5:00:00:02. You need to
know the MAC addresses of the device(s) you want to allow/deny to configure this screen.
Note: You can have up to 25 MAC authentication rules.
Use this screen to view your Zyxel Device's MAC filter settings and add new MAC filter rules. Click
Network Setting > Wireless > MAC Authentication. The screen appears as shown.
Figure 53 Network Setting> Wireless > MAC Authentication
The following table describes the labels in this screen.
Table 24 Network Setting > Wireless > MAC Authentication
LABEL
General
SSID
Chapter 7 Wireless
DESCRIPTION
Click Cancel to exit this screen without saving any changes.
Click OK to save your changes.
DESCRIPTION
Select the SSID for which you want to configure MAC filter settings.
EX3510-B0 User's Guide
96