ZyXEL Communications EX3510-B0 User Manual page 197

The following table describes the fields in this screen.
Table 76 Interface Grouping Criteria
LABEL DESCRIPTION
Source MAC Enter the source MAC address of the packet.
Address
DHCP Option 60 Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic, such
as the type of the hardware or firmware.
Enable Select this option to be able to use wildcards in the Vendor Class Identifier configured for DHCP
wildcard
option 60.
DHCP Option 61 Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN connection
index number.
DHCP Option 125 Select this and enter vendor specific information of the matched traffic.
Enterprise Enter the vendor's 32-bit enterprise number registered with the IANA (Internet Assigned Numbers
Number
Authority).
Manufacturer Specify the vendor's OUI (Organization Unique Identifier). It is usually the first 3 bytes of the MAC
OUI
address.
Serial Number Enter the serial number of the device.
Product Class Enter the product class of the device.
VLAN Group Select this and the VLAN group of the matched traffic from the drop-down list box. A VLAN
group can be configured in Network Setting > VLAN Group.
Cancel Click Cancel to exit this screen without saving any changes.
OK Click OK to save your changes.
Chapter 15 Interface Grouping
EX3510-B0 User's Guide
197