System Log - ZyXEL Communications EX3510-B0 User Manual

Table 96 Syslog Severity Levels (continued)
CODE
5
6
7

21.2 System Log

Use the System Log screen to see the system logs. You can filter the entries by selecting a severity level
and/or category. Click System Monitor > Log > System Log to open the System Log screen.
Figure 143 System Monitor > Log > System Log
The following table describes the fields in this screen.
Table 97 System Monitor > Log > System Log
LABEL
Level
Category
Clear Log
Refresh
Export Log
E-mail Log Now
#
Time
Facility
Level
Category
Messages
Chapter 21 Log
SEVERITY
Notice: There is a normal but significant condition on the system.
Informational: The syslog contains an informational message.
Debug: The message is intended for debug-level purposes.
DESCRIPTION
Select a severity level from the drop-down list box. This filters search results according to the
severity level you have selected. When you select a severity, the Zyxel Device searches through
all logs of that severity or higher.
Select the type of logs to display.
Click this to delete all the logs.
Click this to renew the log screen.
Click this to save the current list of logs to your computer.
Click this to send the log file(s) to the e-mail address you specify in the Maintenance > E-mail
Notification screen.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
This field displays the severity level of the log.
This field displays the type of the log.
This field states the reason for the log.
EX3510-B0 User's Guide
226