Stratasys F123 Series Site Preparation Manual page 16

Site Preparation Guide
6. Remove the foam restraining insert from the top of the printer
Cover
7. Remove the printer from the shipping base, this can be done using a fork lift (see
Printer from Shipping Base - Fork Lift Instructions" (page
ramp (see
Figure 5: Unpacking the Printer (cover removed)
"Remove Printer from Shipping Base - Ramp Instructions" (page
Preparing for Installation
(Figure 5).
Foam Insert
Protective
Cardboard
Container
Panels (x2)
13)) or manually via the use of a
14)).
"Remove
Page 12