Table of Contents
Advertisement
Chapter 2 Preparations
9. Align the pin terminal of riser card of additional PCI riser kit on which RAID Controller is mounted with
the slot of LAN riser slot, and insert the riser card firmly. Form the SAS cable.
Important •
Route the cable as shown in the figure below.
Left server module
Right server module
10. Secure the bracket of additional PCI riser
card with three screws removed in Step 7.
74
Do not touch the terminal part of RAID Controller and motherboard. Installing
boards with dirt or oil can cause malfunction.
•
Applying excess force on RAID Controller may cause damage to RAID Controller
or motherboard.
Express5800/E120e-M User's Guide
1. Installing Internal Optional Devices
Set the insulator so that it is
placed under the rear
bracket.
Rear bracket
Bracket
Advertisement
Table of Contents
