Table of Contents
Advertisement
Chapter 2 Preparations
7. Align the terminal pins of PCI riser card with the
slot on motherboard, insert PCI riser card into
the slot completely.
Route the cable as shown in the figure.
Left server module
Right server module
8. Fix the PCI riser card with three screws you removed in Step 2.
Install FBU (the flash backup unit) with the following procedure.
Also install FBU of a RAID controller "N8103-161" in the same way.
9. Remove the two screws to take out the battery
tray.
68
Express5800/E120e-M User's Guide
1. Installing Internal Optional Devices
Screw
Screw
Advertisement
Table of Contents
