Removal - NEC E120e-M User Manual

Chapter 2 Preparations
8. Route the battery cable of right server module under the cooling sponge and the power cable, and fix it,
as shown in the figure below.
Right server module when standard PCI riser card is used
Cooling sponge
Right server module when additional PCI riser card is used
9. Align the black marker on battery control cable with that on connector of RAID Controller, and connect
the control cable of extra battery to RAID Controller.
10. .Mount the fan duct.
Firmly mount the fan duct so that it would not come up.

1.12.3 Removal

For removing the battery for the RAID Controller, reverse the installation procedure.
Important The cooling sponge is made of soft material, and easy to break by excess force.
Do not lift the end of sponge forcedly to expand it when disconnecting the cable.
N8103-172/173/174
Express5800/E120e-M User's Guide
1. Installing Internal Optional Devices
Pass the battery cable under the
power cable (black and yellow).
Black marker
85