Icom IC-iV85 Instruction Manual page 65

D D Auto repeater
The auto repeater function automatically turns ON or OFF the
duplex operation and tone encoder. The offset and repeater
tone is not changed by the auto repeater function. Reset
these frequencies, if necessary.
• RPt.OF : The auto repeater function is turned OFF.
• RPt.R1 : Activates for duplex only. (default)
• RPt.R2 : Activates for duplex and tone.
D D Auto power-off
USA version only
The transceiver can be set to automatically turn OFF after a
specified period with a beep when no key operations are per-
formed.
• 30 min., 1 hour, 2 hours and OFF (default) can be specified.
The specified period is retained even when the transceiver
is turned OFF by the auto power-off function. To cancel the
function, select "POF.OF" in this
D D Repeater lock-out
Selects lockout type from repeater, busy and OFF.
• RLO.OF : No lockout is activated. (default)
• RLO.RP : The repeater lockout is turned ON.
• RLO.bU : The busy lockout is turned ON.
11
SET MODES
.
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
52