Dimmer; Operation Through The Irc Controller - ProLights TRIBE TRUSSPOD3T User Manual

TRUSSPOD3T
12

3.15 DIMMER

• Enter in Dimmer mode to select specific dimming curve, press the button MENU so many times until
shows [dIM], and press the button ENTER to confirm.
• Press the button UP/DOWN to select [OFF - dIM1 - dIM2 - dIM3].
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

3.16 OPERATION THROUGH THE IRC CONTROLLER

To control the TRUSSPOD3T with the infrared remote control:
• Press the button MENU repeatedly until [SET], then press button ENTER to confirm.
• Using UP/DOWN button to select [On] or [OFF] to enable or disable the infrared remote control.
• Press the button ENTER to confirm the chose.
NOTE - Make sure to point the controller directly at the receiver on the product.