Making A Daisy Chain - BenQ 9H.F6GPK.NA4 Installation Handbook

Making a daisy chain

Once you have installed the video wall, you are ready to connect all displays serially as a daisy
chain for playback or centralized management.
Follow the steps below to form a daisy chain, and refer to the mentioned sections for more
information.
In this chapter, illustrations of 4 daisy chained displays are for your reference only. You can connect more displays
if needed, as long as it is within the limit of each daisy chain to ensure picture quality. See
chained displays on page 30
1. Install the video wall. Follow the instructions in
Video wall installation guide on page
2. Connect the video source (e.g. computer) and
loop all displays using the required cables. See
Cable connections on page 28
extension guide on page 10
3. Set the horizontal and vertical position of the
display wall matrix. This helps your computer
identify how many displays are connected and how
to display the image. See
position on page 31
4. Set the ID number of each display for video wall
management. See
display: PL460/PH460/PL550/PH550 on page 34
more information.
for more information.
21.
and Cable
for more information.
Setting the display
for more information.
Setting the ID number of each
Y
1
for
3
Number of daisy
X
2
4
Video wall installation guide 27